2003-2004 3rd Gen Cummins 5.9L Stealth 64 (341CW) Turbo Upgrade | DuramaxTuner
Found it for less but value our service?
Details
2003 - 2004 Dodge 2500 HD / 3500 HD 5.9L Cummins DT Stealth 64 (HE341cw) Turbo Upgrade - Mechanical Actuator
The 3rd Gen Stealth 64 is an upgraded, drop-in, replacement turbo for 2003-2004, 5.9L Cummins. It is designed to bolt in and requires nothing other than removing the factory turbo and dropping this one in its place. The turbo features a custom profile, 64mm (actual measurement 63.5mm) billet wheel perfectly mapped to a modified compressor cover and 14% larger, 10-blade turbine inside the HE341's 9cm housing. The 3rd Gen Stealth 64 is one of the quickest spooling turbos we have tested for the 5.9L Cummins. Even the most experienced enthusiast has a hard time telling the difference between a stock HE341 and a Stealth 64 during light throttle, daily driving. This is directly tied to the tight exhaust housing and lightweight turbine wheel. If you are going to daily drive your Cummins, consider a quick spool-up a "must-have".
3rd Gen Stealth 64 (341cw)
- Airflow to support 700HP
- Up to 425 RWHP with stock emissions equipment and basic supporting mods
- Tested in competition setups with extensive supporting mods to make 700+ RWHP
- Custom Billet Compressor Wheel
- 63mm, 11-Blade extended tip wheel provides big air and a wide efficiency range
- Tow without the risk of surge (even while lugging)
- Lightweight and high strength
- Provides 72 lbs/min mass airflow compared to 60lbs/min stock
- Beast Wheelâ„¢: The Ultimate Turbine Wheel
- Exclusive 10-blade design and casting
- Improve turbine efficiency
- Helps produce our distinct Stealth turbo exhaust sound
- 30% larger than stock
- Sized to maximize throttle response
- Lower EGTs
- Lower drive pressures at high load
- 40% thicker blades than others on the market
- Increased temperature resistance
- Higher strength
- Exclusive 10-blade design and casting
- Brand New Parts
- No Core Charges
Add on a Stealth Boost Tester.
Boost leaks can kill diesel engines. They cause higher EGTs, decrease your power, and lower fuel economy. Properly being able to test your entire charged air system is essential to getting peak performance and longevity out of your diesel engine. Charged air systems include everywhere from the turbocharger to the intake manifold. Your intercooler system, Exhaust Gas Recirculation components, and even the Turbocharger compressor cover can all develop boost leaks. This boost tester is exactly what you need if you work on diesel trucks regularly or just want to check the condition of your engine's charge system. Here's what you can get:
- Heavy Duty Regulator
- Extremely Accurate
- Testes Entire Charge system
- Precise control over test conditions
- Easy to use and read
- Premium parts built to last for a lifetime
- High-quality seals
- Liquid gauge prevents erratic readings
- Metal construction
- Extremely Accurate
- CNC Precision-Cut Adapter
- Perfect Fitment
- Clean look
- Intelligent design
- Made from high-quality materials
- Made and assembled in the USA
| 3rd Gen Stealth 64 Turbo Fitment | ||||
| Year | Make | Model | 05086863AA 14030060-101 14030060-102 14030060-103 14030060-104 14030060-105 14030060101 14030060102 14030060103 14030060104 14030060105 3599810 3599811 4035044 4037001 4037002 4044050 4044051 4089392 4955452 5086863AB 847-1011 8471011 R5086863AB 14030106-101 14030106-102 14030106-103 14030106-104 14030106-105 14030106-106 14030106-107 14030106-108 14030106-109 14030106-110 14030106-111 14030106-112 14030106-113 14030106-114 14030106-115 14030106101 14030106102 14030106103 14030106104 14030106105 14030106106 14030106107 14030106108 14030106109 14030106110 HE341 HE341CW HE 341 | |
More Information
| Part Number | DM1552050202000 |
|---|---|
| Brand | DuramaxTuner |
| Type of Part | Turbo Upgrades |
| Engine Fitment | Cummins 5.9L |
| Length | 15 |
| Width | 15 |
| Height | 15 |
| Weight | 48.000000 |
Reviews
Fitment
2003 - 2004 Dodge 2500 HD / 3500 HD 5.9L Cummins DT Stealth 64 (HE341cw) Turbo Upgrade - Mechanical Actuator
The 3rd Gen Stealth 64 is an upgraded, drop-in, replacement turbo for 2003-2004, 5.9L Cummins. It is designed to bolt in and requires nothing other than removing the factory turbo and dropping this one in its place. The turbo features a custom profile, 64mm (actual measurement 63.5mm) billet wheel perfectly mapped to a modified compressor cover and 14% larger, 10-blade turbine inside the HE341's 9cm housing. The 3rd Gen Stealth 64 is one of the quickest spooling turbos we have tested for the 5.9L Cummins. Even the most experienced enthusiast has a hard time telling the difference between a stock HE341 and a Stealth 64 during light throttle, daily driving. This is directly tied to the tight exhaust housing and lightweight turbine wheel. If you are going to daily drive your Cummins, consider a quick spool-up a "must-have".
3rd Gen Stealth 64 (341cw)
- Airflow to support 700HP
- Up to 425 RWHP with stock emissions equipment and basic supporting mods
- Tested in competition setups with extensive supporting mods to make 700+ RWHP
- Custom Billet Compressor Wheel
- 63mm, 11-Blade extended tip wheel provides big air and a wide efficiency range
- Tow without the risk of surge (even while lugging)
- Lightweight and high strength
- Provides 72 lbs/min mass airflow compared to 60lbs/min stock
- Beast Wheelâ„¢: The Ultimate Turbine Wheel
- Exclusive 10-blade design and casting
- Improve turbine efficiency
- Helps produce our distinct Stealth turbo exhaust sound
- 30% larger than stock
- Sized to maximize throttle response
- Lower EGTs
- Lower drive pressures at high load
- 40% thicker blades than others on the market
- Increased temperature resistance
- Higher strength
- Exclusive 10-blade design and casting
- Brand New Parts
- No Core Charges
Add on a Stealth Boost Tester.
Boost leaks can kill diesel engines. They cause higher EGTs, decrease your power, and lower fuel economy. Properly being able to test your entire charged air system is essential to getting peak performance and longevity out of your diesel engine. Charged air systems include everywhere from the turbocharger to the intake manifold. Your intercooler system, Exhaust Gas Recirculation components, and even the Turbocharger compressor cover can all develop boost leaks. This boost tester is exactly what you need if you work on diesel trucks regularly or just want to check the condition of your engine's charge system. Here's what you can get:
- Heavy Duty Regulator
- Extremely Accurate
- Testes Entire Charge system
- Precise control over test conditions
- Easy to use and read
- Premium parts built to last for a lifetime
- High-quality seals
- Liquid gauge prevents erratic readings
- Metal construction
- Extremely Accurate
- CNC Precision-Cut Adapter
- Perfect Fitment
- Clean look
- Intelligent design
- Made from high-quality materials
- Made and assembled in the USA
| 3rd Gen Stealth 64 Turbo Fitment | ||||
| Year | Make | Model | 05086863AA 14030060-101 14030060-102 14030060-103 14030060-104 14030060-105 14030060101 14030060102 14030060103 14030060104 14030060105 3599810 3599811 4035044 4037001 4037002 4044050 4044051 4089392 4955452 5086863AB 847-1011 8471011 R5086863AB 14030106-101 14030106-102 14030106-103 14030106-104 14030106-105 14030106-106 14030106-107 14030106-108 14030106-109 14030106-110 14030106-111 14030106-112 14030106-113 14030106-114 14030106-115 14030106101 14030106102 14030106103 14030106104 14030106105 14030106106 14030106107 14030106108 14030106109 14030106110 HE341 HE341CW HE 341 | |
