#1 Journal Bearings
#2 Retaining Rings for Journal Bearings
#3 Piston Ring for Turbine End
#4 Thrust Washer
#5 Thrust Bearing
#6 Thrust Collar/Slinger
#7 Piston Ring for Compressor End
#8 O-Ring for Bearing Housing to Seal Plate
#9 Seal Plate
#10 Locknut for Shaft
#12 Bolts for Turbine End
We have many Holset Rebuild kit models listed below. Please Select Kit to the right.
Complete Rebuild Kits:
H1C/D/E and H2A
Don't confuse our rebuild kits with the "cheap imitation" products found on auction sites or less than reputable online stores. Buy your USA, Canada or UK made rebuild kit from TurboKits.com and rest assured knowing you are receiving quality parts!
This is a very complete kit that comes with all thrust components and the seal plate which are common wear items on high mileage turbos. These items should be replaced during a rebuild procedure. This kit will rebuild Dodge Cummins Turbo Diesel truck turbos from '95-'06 (some '94's also use this turbo, but not all) along with many other HX35/40 applications. This kit will also work for the Holset model HY35 as is found on some of the later model Dodge trucks with an automatic transmission. Detailed rebuild instructions are available upon request after a purchase has been made.
Because we do not offer returns on turbo rebuild kits, please make sure you order the correct item. If you have questions, contact our sales department with the turbocharger part #, model #, and serial # to ensure order accuracy.
TurboKits.com recommends all turbochargers be balanced as part of the assembly & rebuild process. It isn’t uncommon for turbo components to be spinning at 150,000+ RPM and at that speed, an unbalanced wheel or shaft will cause havoc on the performance and reliability of your unit. A great analogy is to compare the compressor wheel of a turbo to a wheel/tire being mounted to your vehicle. If that combination is not balanced, vibration occurs. The shaking travels through the hub of the vehicle, causing bearing failure, ball joint failure, and potentially tie rod failure, jeopardizing safety and efficiency. While we can’t always feel the vibration occurring inside an unbalanced turbo, we see the smoke or hear the squeal after it has failed. If you do not have access to balancing equipment for your turbocharger, please select the TurboKits.com rebuild service so we can properly perform the repair for you! Thanks.