AEM Cold Air Intake
Found it for less but value our service?
Details
AEM Cold Air Intake
Increased horsepower
Tuned and dyno-tested to improve acceleration and engine sound
Low restriction aluminum tubing
Air filter lasts up to 100,000 miles before cleaning is required (depending on driving conditions)
Washable and reusable oil-free filter media
AEM Lifetime Limited Warranty
The AEM 21-696C fits some Dodge Challenger, and Dodge Charger models. See vehicle applications for details.
The AEM 21-696C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle’s restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Dodge Challenger and Charger models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine’s factory emissions control devices including the IAT sensor as well as a replacement silicone breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-696C vehicle applications to determine the legal status for each vehicle.
Specifications AEM 21-696C Product Specifications
Estimated Horsepower Gain - 7.36 HP @ 3800 RPM
Replacement Filter - 21-2147DK
Air Filter Color - Red
Air Filter Material - Non-woven Synthetic
Air Filter Outlet Shape - Round
Clamps Included - 7
Clamp Material - Steel
Clamp Style - Regular
Couplers Included - None
Product Style - AEM Cold Air Intake System
Air Filter Height - 7 in (178 mm)
Intake Pipe Color / Finish - Gunmetal Gray/Polished
Intake Pipe Material - Aluminum
CARB EO Number - D-670-15
Street Legal In All US States - Yes
TUV Approved (Europe) - No
Weight - 8.9 lb (4 kg)
Product Box Height - 11.6 in (295 mm)
Product Box Length - 24.38 in (619 mm)
Product Box Width - 12.2 in (310 mm)
Mounting Hardware Included - Yes
Horsepower gains based on similar vehicle dynamometer test. Results will vary.
Applications:
2010 Dodge Charger 3.5L V6 F/I
All Models Street Legal In All US States:Yes
CARB EO Number: D-670-15 TUV Approved (Europe): No
2010 Dodge Challenger 3.5L V6 F/I
All Models Street Legal In All US States:Yes
CARB EO Number: D-670-15 TUV Approved (Europe): No
2009 Dodge Charger 3.5L V6 F/I
All Models Street Legal In All US States:Yes
CARB EO Number: D-670-15 TUV Approved (Europe): No
2009 Dodge Challenger 3.5L V6 F/I
All Models Street Legal In All US States:Yes
CARB EO Number: D-670-15 TUV Approved (Europe): No
More Information
| Part Number | 21-696C, 21-696P |
|---|---|
| Brand | AEM |
| Type of Part | Intakes |
| Engine Fitment | 3.5L |
| Length | 25 |
| Width | 12 |
| Height | 12 |
| Weight | 9.000000 |
Reviews
Fitment
AEM Cold Air Intake
Increased horsepower
Tuned and dyno-tested to improve acceleration and engine sound
Low restriction aluminum tubing
Air filter lasts up to 100,000 miles before cleaning is required (depending on driving conditions)
Washable and reusable oil-free filter media
AEM Lifetime Limited Warranty
The AEM 21-696C fits some Dodge Challenger, and Dodge Charger models. See vehicle applications for details.
The AEM 21-696C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle’s restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Dodge Challenger and Charger models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine’s factory emissions control devices including the IAT sensor as well as a replacement silicone breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-696C vehicle applications to determine the legal status for each vehicle.
Specifications AEM 21-696C Product Specifications
Estimated Horsepower Gain - 7.36 HP @ 3800 RPM
Replacement Filter - 21-2147DK
Air Filter Color - Red
Air Filter Material - Non-woven Synthetic
Air Filter Outlet Shape - Round
Clamps Included - 7
Clamp Material - Steel
Clamp Style - Regular
Couplers Included - None
Product Style - AEM Cold Air Intake System
Air Filter Height - 7 in (178 mm)
Intake Pipe Color / Finish - Gunmetal Gray/Polished
Intake Pipe Material - Aluminum
CARB EO Number - D-670-15
Street Legal In All US States - Yes
TUV Approved (Europe) - No
Weight - 8.9 lb (4 kg)
Product Box Height - 11.6 in (295 mm)
Product Box Length - 24.38 in (619 mm)
Product Box Width - 12.2 in (310 mm)
Mounting Hardware Included - Yes
Horsepower gains based on similar vehicle dynamometer test. Results will vary.
Applications:
2010 Dodge Charger 3.5L V6 F/I
All Models Street Legal In All US States:Yes
CARB EO Number: D-670-15 TUV Approved (Europe): No
2010 Dodge Challenger 3.5L V6 F/I
All Models Street Legal In All US States:Yes
CARB EO Number: D-670-15 TUV Approved (Europe): No
2009 Dodge Charger 3.5L V6 F/I
All Models Street Legal In All US States:Yes
CARB EO Number: D-670-15 TUV Approved (Europe): No
2009 Dodge Challenger 3.5L V6 F/I
All Models Street Legal In All US States:Yes
CARB EO Number: D-670-15 TUV Approved (Europe): No
