Enthuspec 4pc Differential Mount Kit
Found it for less but value our service?
Details
Enthuspec Differential Mounts for the Hyundai Genesis Coupe
The OEM Factory bushing used in the subframe is very soft and flexible. The differential moves alot under hard accelerations and driving conditions. Most of that flex is pivoted off the driveshaft rear yoke, thus making the front of the differential to dip down and twist. These bushings solidly hold the differential to the subframe, eliminating the unwanted movement and help with wheel hop to get the power to the ground. Bushings are CNC machinced aluminum for precision fitment. Designed for racing purposes where noise and vibration is a trade off for performance.
T6061 Aluminum
Eliminates sloppy factory bushing
Made in the USA
Eliminates differential twisting and dipping on hard accelerations
Fits 2010-12 subframes only
4pc Bushings
Class 10.9 Bolt Included
Designed for Racing purposes
Track Use ONLY!
*Take note, some 2010-2012 subframes have a variance on the passenger side
rear bushing. Measure the hole to be ~30mm to use the supplied passenger
side bushing and bolt. (16mm hole is a hybrid from a Bk1 and BK2
subframe) - Also make sure your driver side does not have a sleeve like
the BK2 subframes. We have seen R-Spec subframes having a BK2 style.
More Information
| Part Number | E-GEN-DIFFBK1 |
|---|---|
| Brand | Enthuspec |
| Type of Part | Drivetrain |
| Length | 6.0 |
| Width | 10.0 |
| Height | 6.0 |
| Weight | 10.000000 |
Reviews
Fitment
Enthuspec Differential Mounts for the Hyundai Genesis Coupe
The OEM Factory bushing used in the subframe is very soft and flexible. The differential moves alot under hard accelerations and driving conditions. Most of that flex is pivoted off the driveshaft rear yoke, thus making the front of the differential to dip down and twist. These bushings solidly hold the differential to the subframe, eliminating the unwanted movement and help with wheel hop to get the power to the ground. Bushings are CNC machinced aluminum for precision fitment. Designed for racing purposes where noise and vibration is a trade off for performance.
T6061 Aluminum
Eliminates sloppy factory bushing
Made in the USA
Eliminates differential twisting and dipping on hard accelerations
Fits 2010-12 subframes only
4pc Bushings
Class 10.9 Bolt Included
Designed for Racing purposes
Track Use ONLY!
*Take note, some 2010-2012 subframes have a variance on the passenger side
rear bushing. Measure the hole to be ~30mm to use the supplied passenger
side bushing and bolt. (16mm hole is a hybrid from a Bk1 and BK2
subframe) - Also make sure your driver side does not have a sleeve like
the BK2 subframes. We have seen R-Spec subframes having a BK2 style.
