SFR Single Turbo Kit - Complete Kit
Found it for less but value our service?
Details
SFR Single Turbo Kit - Complete Kit for 03-06 Nissan 350z VQ35DE
- Precision 6266 T4 Billet Turbo
- 304SS Cross Over Piping
- 304SS Uppipe
- 304SS Stainless Downpipe
- Turbosmart or Precision 38mm Wastegate
- Turbosmart or Precision 50mm Blow Off Valve (BOV)
- Bell Front Mount Intercooler
- Intercooler Piping
- 3" Intake Pipe
- K&N Air Filters
- All Oil Lines & Fittings
- All Couplers & Clamps
- Install Instructions & Wiring Diagrams
- All Necessary Hardware & Fittings
- Uprev Osiris Suite w- Remote Tune Session *Get's you running and ready for a professional DYNO tune!
- (6) 550cc Drop In Injectors
- Walbro 255LPH In-Tank High Flow Fuel Pump
- Made to Order Kit - ET 6-8 Weeks+
SFR wanted the ability to make horsepower at low boost with room to grow. So they decided to use a full sized T4 turbo. A Precision 62mm turbo with a T4 exhaust housing was chosen to handle the duties of compressing the air. This turbo has made 412WHP @ 6 psi, on a stock motor with 91 octane fuel! It has the ability of making 700WHP on a built motor. If that is not enough we have even larger turbos which will allow you to make well beyond 1000WHP!
A 2.5" up pipe is what was called upon to feed the hungy turbo lots of exhaust and a 3" down pipe is on duty to evacuate this exhuast in an efficient manner. SFR chose a Precision 38mm wastegate (with atmospheric dump or routed back into the downpipe) to regulate boost pressure. The intercooler ia a massive bar and plate unit. For the G35 twin bar and plate cores is used. All of the intercooler piping is made of mandrel bent 6061 aluminum. A Precision 50mm BOV was picked to releive the boost pressure between shifts.
The SFR single turbo system uses the stock headers but we also offer some equal length, Burns collector headers for those that want to upgrade the stock exhaust manifolds. The Speed Force Racing single turbo system for the G35/350Z includes the following parts: T-62 turbo, 3-an oil feed and 3/4" ID oil return line and fittings, 304SS up-pipe and down pipe, Precision 38mm wastegate, bar and plate intercooler, aluminum intake and intercooler piping, silicone hoses, stainless steel hose clamps, Precision 50mm blow-off valve, K&N airfilter and all hardware and instructions needed for a professional install. The complete system also comes with an Uprev Osiris Suite, 550cc injectors and Walboro 255 lph fuel pump.
*Retains AC, the hard lines need to be adjusted out of the way and heat wrapped.
**Will fit RHD with USA LHD Starter (Right side of the motor) and Radiator as the filler neck is different. Slim line knuckle or clearance for the knuckle to rotate will be required.
Please be advised these parts are sold as off road use only! Check with your local and state authorities regarding installation on your pollution controlled vehicle!
More Information
| Brand | Speed Force Racing |
|---|---|
| Type of Part | Turbo Kits |
| Engine Fitment | VQ35DE (V6) *Incl. REV UP* |
| Boost | *MADE TO ORDER KIT* |
| Horsepower Gains | 200+ WHP |
| Length | 42.0 |
| Width | 20 |
| Height | 20 |
| Weight | 95.000000 |
Reviews
Fitment
SFR Single Turbo Kit - Complete Kit for 03-06 Nissan 350z VQ35DE
- Precision 6266 T4 Billet Turbo
- 304SS Cross Over Piping
- 304SS Uppipe
- 304SS Stainless Downpipe
- Turbosmart or Precision 38mm Wastegate
- Turbosmart or Precision 50mm Blow Off Valve (BOV)
- Bell Front Mount Intercooler
- Intercooler Piping
- 3" Intake Pipe
- K&N Air Filters
- All Oil Lines & Fittings
- All Couplers & Clamps
- Install Instructions & Wiring Diagrams
- All Necessary Hardware & Fittings
- Uprev Osiris Suite w- Remote Tune Session *Get's you running and ready for a professional DYNO tune!
- (6) 550cc Drop In Injectors
- Walbro 255LPH In-Tank High Flow Fuel Pump
- Made to Order Kit - ET 6-8 Weeks+
SFR wanted the ability to make horsepower at low boost with room to grow. So they decided to use a full sized T4 turbo. A Precision 62mm turbo with a T4 exhaust housing was chosen to handle the duties of compressing the air. This turbo has made 412WHP @ 6 psi, on a stock motor with 91 octane fuel! It has the ability of making 700WHP on a built motor. If that is not enough we have even larger turbos which will allow you to make well beyond 1000WHP!
A 2.5" up pipe is what was called upon to feed the hungy turbo lots of exhaust and a 3" down pipe is on duty to evacuate this exhuast in an efficient manner. SFR chose a Precision 38mm wastegate (with atmospheric dump or routed back into the downpipe) to regulate boost pressure. The intercooler ia a massive bar and plate unit. For the G35 twin bar and plate cores is used. All of the intercooler piping is made of mandrel bent 6061 aluminum. A Precision 50mm BOV was picked to releive the boost pressure between shifts.
The SFR single turbo system uses the stock headers but we also offer some equal length, Burns collector headers for those that want to upgrade the stock exhaust manifolds. The Speed Force Racing single turbo system for the G35/350Z includes the following parts: T-62 turbo, 3-an oil feed and 3/4" ID oil return line and fittings, 304SS up-pipe and down pipe, Precision 38mm wastegate, bar and plate intercooler, aluminum intake and intercooler piping, silicone hoses, stainless steel hose clamps, Precision 50mm blow-off valve, K&N airfilter and all hardware and instructions needed for a professional install. The complete system also comes with an Uprev Osiris Suite, 550cc injectors and Walboro 255 lph fuel pump.
*Retains AC, the hard lines need to be adjusted out of the way and heat wrapped.
**Will fit RHD with USA LHD Starter (Right side of the motor) and Radiator as the filler neck is different. Slim line knuckle or clearance for the knuckle to rotate will be required.
Please be advised these parts are sold as off road use only! Check with your local and state authorities regarding installation on your pollution controlled vehicle!
