TurboKits.com Genesis Coupe GDi 3.8L Single Turbo Kit
*SALE* $500 Off, FREE NGK Plugs - Ends 08/30/21
*SALE* $500 Off, FREE NGK Plugs - Ends 08/30/21
FREE Upgrade to Precision 6266JB Billet Turbo
TurboKits.com Front Mount Intercooler
TurboKits.com Intercooler Piping
TurboKits.com Turbo Inlet Pipe
TurboKits.com CrossOver Pipe
Forge Motorsport Blow Off Valve
TurboSmart Compgate40 Wastegate
*DIY Wastegate Recirc
Vibrant V-Band Clamps for Exhaust & Turbo
Oil Feed & Return Lines
Oil Adapters & Hardware
DEI Turbo Blanket, Cool Tape & Wrap Kit
Washer Fluid Reservoir
Couplers & Gaskets
K&N Air Intake Filter
Step by Step Installation Instructions
Stock HP = 348HP
Kit HP = 525HP + @ 8 PSI *Secondary Test Pipes & High Flow Exhaust
Have a 3.8L Hyundai Genesis and desire gobs of gut wrenching power? TurboKits.com is proud to release a beautifully crafted bolt on “horsepower in a box” turbo system aimed at enthusiasts looking to maximize the performance, sound, and thrill of driving a 500 HP street car.
"After being a customer of TurboKits.com for over two years, I wanted to write a little bit about my collective experiences over this time.
A bit of background on myself, I am an Engineer, an avid car enthusiast, and every car I have owned has had a turbo on it at some point. I first got into car at age 9 when I first saw The Fast and the Furious. Once I bought my first car at age 16 (a used 2004 Honda Civic with SOHC grandma spec), I decided I wanted to turbo it. Being in high school and not knowing anything about turbos, I turned to eBay and typed in Honda Civic Turbo kit. At the time, I had no idea about a/r trims, turbo sizing, cfm, compression ratio, matching flanges or anything else and I bought a turbo kit that had a "bolt on fit". After months of cutting pipes and flanges, having a shop custom weld new pieces, finding out what a slave cylinder does (after I chopped mine in half to make the apocalyptically large turbo fit), and after spending all of my hard earned McDonalds money, I had an oil spewing, turbo Honda civic with astronomical lag until about 5000 rpm.
Although this project taught me a lot, it created a significant amount of heart ache and wasted money but quitting wasn't an option. Four years later, I discovered TurboKits.com. I had just purchased the newly redesigned 2013 Hyundai Genesis Coupe V6. The car was fun and exciting until I got used to the power. That was when I started looking into turbo options and I realized TurboKits.com was the only company developing it.
My first order was a test order for some supporting mods I would need. A new clutch, an upgraded radiator with hoses, Engine mounts, SS braided clutch and brake lines, and some other tidbits. At the time, there was limited information as to what would fit from the previous model to the current model and even the manufacturers didn't know. After sitting in a box for a few months, I found out Hyundai changed the subframe and the engine mounts wouldn't fit my vehicle. I thought, surely there is no way I can return these after this long. Tech support not only accepted my return, but they updated the product listing so others would not have the same issue.
Moving forward, I decided to purchase the full turbo kit for the 2013 Genesis Coupe V6. Unlike my previous turbo kit experience with eBay, this kit had everything I needed and it was a true bolt on for any mechanically inclined person. The install was not very difficult and only required basic tools and a bit of patience to get the V bands properly aligned. I'd say it is very similar difficulty to changing a clutch, but without the heavy lifting or fear of dropping a transmission/driveshaft on your face. With the instructions provided, it is a very straight forward process. During my installation, I had a few questions about parts that seemed out of place or misaligned, but tech support was quick with a response to keep me calm and modding on. Everything fit perfectly into place and when I finally drove the car, it was INSANE. Power, throttle response, reliability, and lack of traction made me smile with a grin larger than the Joker... but I needed new tires. Even with a budget street tire on 255, I still got 13.0 at 113 mph in the quarter mile. That is fantastic considering no traction down low (my heavy foot may be to blame as this car normally does well flooring it at the track prior to the turbo). Now with a custom tune I am making 450 whp and the car now behaves very differently than when it was stock. It was like stepping into a whole new car. A new car where Mustangs, Camaros, Corvettes, are in for an unpleasant surprise. This "new car" beat all of its new peers." Ryan G., Texas.
"I have had the kit installed for a few months now and boy... it changes the whole car into a monster. After adding the boost I went from battling 370Zs to going toe to toe with Corvettes and Coyotes. Awesome quality, everything fit together just like it should, and everything I needed was in the box from the beginning. Pretty simple and I was able to do it all in my small garage with a set of tools from Harbor Freight. Couldnt be more pleased." - Chris M., Georgia.
As seen in Performance Auto & Sound Magazine - Click Here
Estimated Install = 12-15 Hrs
The kits ships with a 5 PSI Spring. For higher boost levels a boost controller is suggested
2014+ May Require AC Line kit - $29.00
The PWR Throttle Body Spacer is highly suggested when installing Water/Meth. Just let us know and we can add to your order!
The kit is designed to use the factory manifolds. The only aftermarket headers that have confirmed fitment are the TurboKits.com headers here: Click Here
For CA Proposition 65 Warning: Click Here
|Filter by Type of Part||Turbo Kits|
|Select Your Engine||3.8L GDi 6MT & 8AT|