| *SUMMER SPECIAL* TONS OF FREEBIES!! | BUY BACK GUARANTEE | WE SHIP INTERNATIONAL! | MILITARY DISCOUNTS! |
| ATP GT Turbo Upgrades for 07+ Mazdaspeed3 |
Top |
|
Brand: ATP Turbo
Desc: 07+ Mazdaspeed 3
Type: GT Upgrades
Status: Ready to Ship
Price: $1695.00 & Up
 Buy Now
|
Mazdaspeed3 Turbo Upgrades:
GT Upgrades are bolt on turbo upgrades for the Mazdaspeed3. Garrett GT Dual Ball Bearings turbos with ATP proprietary exhaust housing and internal wastegate all ready to bolt up to Mazdaspeed3 exhaust manifold and downpipe. Includes all coolant and oil connections to connect turbo to factory lines. Does not include 3" inlet pipe and 3" downpipe necessary to complete a "kit" in order maximize the turbo.
GT2871R: $1695.00 - Efficient up to 20-21 psi and can produce over 400 crank HP. Highly recommended for a very broad powerband with a lot of "area under the curve".
GT3071R: $1845.00 - Efficient up to 22 psi and can produce over 450 crank HP. Highly recommended for a very broad powerband with a lot of "area under the curve".
GT3076R: $1845.00 - Efficient up to 26 psi and can produce over 500 crank HP. Spools about 500 RPM's later than the GT3071R on the same 2.3L engine.
GT35R: $2045.00 - Efficient up to 30 psi and can produce 550-600 crank HP. Spools about 700 to 800 RPM's later than the GT3071R on the same 2.3L engine.
* supporting mods and proper tuning required to maximize HP from these upgrades
|
|
Turbo Upgrade | Intercooler Kits | Package Kits | Exhausts & Downpipes | Engine Upgrades | Brake Upgrades
| ATP Front Mount Intercooler (FMIC) for 07+ Mazdaspeed3 |
Top |
|
|
|
Turbo Upgrade | Intercooler Kits | Package Kits | Exhausts & Downpipes | Engine Upgrades | Brake Upgrades
| TurboXS Staged Packages for 07+ Mazdaspeed3 |
Top |
|
Brand: TurboXS
Desc: 07+ Mazdaspeed 3
Type: Staged Packages
Status: Ready to Ship
Price: See Description
Buy Now
|
Mazdaspeed3 Staged Packages:
Stage 1 - 325.3 Ft. lbs & 291 Wheel Horsepower (DYNO): $395.00
- TurboXS Mazdaspeed 3 Downpipe (MS3-DP)
- TurboXS Mazdaspeed 3 Racepipe (MS3-RP)
- Also Works on 2010 Models!
Stage 2 - 326 Ft. lbs & 309 Wheel Horsepower (DYNO): $1295.00
- TurboXS Mazdaspeed 3 Downpipe (MS3-DP)
- TurboXS Mazdaspeed 3 Racepipe (MS3-RP)
- TurboXS Mazdaspeed 3 Cold Air Intake (MS3-INTAKE)
- TurboXS Mazdaspeed 3 Catback Exhaust (MS3-CBE)
Stage 3 - 345.4 Ft. lbs & 324 Wheel Horsepower (DYNO): $2395.00
- TurboXS Mazdaspeed 3 Downpipe (MS3-DP)
- TurboXS Mazdaspeed 3 Racepipe (MS3-RP)
- TurboXS Mazdaspeed 3 Cold Air Intake (MS3-INTAKE)
- TurboXS Mazdaspeed 3 Catback Exhaust (MS3-CBE)
- TurboXS Mazdaspeed 3 Front Mount Intercooler (MS3-FMIC)
|
|
Turbo Upgrade | Intercooler Kits | Package Kits | Exhausts & Downpipes | Engine Upgrades | Brake Upgrades
| Vibrant Exhaust System for 07+ Mazdaspeed3 |
Top |
|
Brand: Vibrant
Desc: 07+ Mazdaspeed 3
Type: Exhaust System
Status: Ready to Ship
Price: $745.00
Buy Now
|
Mazdaspeed3 Cat Back Exhaust:
Vibrant STREETPOWER Cat-Back Exhaust Systems are styled for the street and engineered to perform!
All STREEPOWER Cat-Backs Feature:
- 16 gauge CNC Mandrel Bent Stainless Steel exhaust tubing.
- "True Straight Through" Rear Mufflers and Resonators for low, deep exhaust tone.
- Full TIG Welds for optimum strength.
- Easy Bolt-On installation, utilizing all stock mounting points
- Exhaust Tubing Size: 3" O.D.
- Tip(s) Size/Style: 4" Round, Angle Cut
|
|
| Borla Exhaust System for 07+ Mazdaspeed3 |
Top |
|
Brand: Borla
Desc: 07+ Mazdaspeed 3
Type: Exhaust System
Status: Ready to Ship
Price: $645.00
Buy Now
|
Mazdaspeed3 Cat Back Exhaust:
Borla is internationally known as the most winning exhaust on the market, so why not add this history to your high performance Mazdaspeed3? BORLA exhaust systems feature patented straight-through and multi-core technology to unleash horsepower stifled by the stock exhaust design. Each borla exhaust is built from premium Aircraft-Quality T-304 Stainless Steel to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. Borla also backs all of their exhaust systems with their exclusive Million-Mile Warranty, so you can relax with the knowing that your exhaust will last for the life of your car and longer! The Borla exhaust for the 07-08 Mazdaspeed3 features an embossed 4" stainless steel rolled exhaust outlet, for the performance look your 'speed 3 deserves.
|
|
| ATP True 3'' Upper Downpipe for 07+ Mazdaspeed3 |
Top |
|
Brand: ATP
Desc: 07+ Mazdaspeed 3
Type: Upper Downpipe
Status: Ready to Ship
Price: $259.00
Buy Now
|
ATP True 3'' Mazdaspeed3 Upper Downpipe:
Upper downpipe for the Mazdaspeed 3(fits 2007 through 2010, 3" stainless, cat delete pipe. High flow and full 3" throughout. Deletes the restrictive doughnut gasket found in many other designs and promotes full 3" flow throughout. All CNC machined flanges, 304 stainless tubing featuring TIG welded construction. Fully built in the USA.
|
|
| ATP True 3'' Lower Downpipe for 07+ Mazdaspeed3 |
Top |
|
Brand: ATP
Desc: 07+ Mazdaspeed 3
Type: Lower Downpipe
Status: Ready to Ship
Price: $179.00
Buy Now
|
ATP True 3'' Mazdaspeed3 Lower Downpipe:
Lower downpipe for the Mazdaspeed 3(fits 2007 through 2010, 3" stainless, cat delete pipe. High flow and full 3" throughout. Deletes the restrictive doughnut gasket found in many other designs and promotes full 3" flow throughout. All CNC machined flanges, 304 stainless tubing featuring TIG welded construction. Fully built in the USA.
|
|
| ATP True 3'' Long Downpipe for 07+ Mazdaspeed3 |
Top |
|
Brand: ATP
Desc: 07+ Mazdaspeed 3
Type: Long Downpipe
Status: Ready to Ship
Price: $299.00
Buy Now
|
ATP True 3'' Mazdaspeed3 Long Downpipe:
Long downpipe (replaces both upper and lower downpipes/cats), Mazdaspeed3 (fits 2007 through 2010, 3" stainless, high flow and full 3" throughout. Deletes the restrictive donut gasket found in many other designs and promotes full 3" flow throughout. All CNC machined flanges, 304 stainless tubing, and TIG welded construction. Fully built in the USA.
|
|
| TurboXS Downpipe for 07+ Mazdaspeed3 |
Top |
|
Brand: TurboXS
Desc: 07+ Mazdaspeed 3
Type: Downpipe
Status: Ready to Ship
Price: $269.00
* Works on 2010 Models!
Buy Now
|
Mazdaspeed3 Downpipe:
TurboXS releases the Mazdaspeed3 downpipe (MS3-DP). This downpipe is the pure key to turning your MS3 into a real beast. A stock MS3 made 274 ft-lbs and 244.1 whp. on a Dynapack Dyno. Adding our MS3-DP and the MS3-RP, we saw an average peak torque gain of 50 ft-lbs and a peak wheel horsepower gain of 40 whp. The downpipe's bellmouth is made from investment cast stainless steel and was engineered with clearance notches to ease installation. The bellmouth was used to give your wastegate the proper flow characteristics to avoid a boost creep and promote high exhaust gas velocity. 3 inch diameter mandrel bent stainless steel is used throughout to Downpipe to compliment the bellmouth housing and a cast stainless steel flange completes the downpipe. The MS3-DP was designed to mate to our catless race pipe (MS3-RP - $139.00). To reduce the risk of throwing a Check Engine Light (CEL) due to removing the factory catalytic converter, we have extended the bung for the rear oxygen sensor.
|
|
Turbo Upgrade | Intercooler Kits | Package Kits | Exhausts & Downpipes | Engine Upgrades | Brake Upgrades
| TurboXS Blow-Off Valve (BOV) for 07+ Mazdaspeed3 |
Top |
|
Brand: TurboXS
Desc: 07+ Mazdaspeed 3
Type: Blow Off Valve
Status: Ready to Ship
Price: $229.00
* Works on 2010 Models!
Buy Now
|
Mazdaspeed3 Hybrid Blow Off Valve (BOV):
TurboXS releases the first Hybrid Blow Off Valve designed specifically tuned for the Mazdaspeed 3 & 6. The valve features an innovative re-circulation and vent to atmosphere operation. It has been tuned to offer the best blend of vent to atmosphere and re-circulation without check engines lights, stumbling or the dreaded back fire issues that are commonly associated with Blow OFF Valves and turbocharged cars that use Mass Air Flow configurations. Each kit will bolt directly to your Mazdaspeed without any additional parts.
|
|
| ATP Air Intake for 07+ Mazdaspeed3 |
Top |
|
Brand: ATP Turbo
Desc: 07+ Mazdaspeed 3
Type: Intake Pipe
Status: CALL
Price: $275.00
Buy Now
|
Mazdaspeed3 Intake Pipe:
High flow 3" inlet pipe kit for MS3 (Mazdaspeed3) turbo engine. Replaces the restrictive "pancaked" inlet pipe between turbo and MAF housing built into the factory airbox.
This replacement piece was built to handle the flow requirements of the big Garrett turbo upgrade, is built out nice aluminum casting (Internal and external of inlet tube is tumble polished for maximum flow), formed with smooth transitions to integrate a more desirable flowpath and accomodates much more volume because it’s all 3” throughout. The unit can also be ordered with the proper transition coupler to fit the stock turbo and unleash more power from it. Includes all parts from turbo inlet to your "intake". Specify Garrett 4" inlet or stock turbo 2" inlet. Specify color: black, red, or blue silicone connectors.
|
|
| ATP Intake Pipe for 07+ Mazdaspeed3 |
Top |
|
Brand: ATP Turbo
Desc: 07+ Mazdaspeed 3
Type: Intake Pipe
Status: Ready to Ship
Price: $195.00
Buy Now
|
Mazdaspeed3 Intake Pipe:
High flow inlet extension including 3" billet aluminum MAF housing, 3" inlet elbow, and 3" open element filter. Bolts onto our 3" inlet pipe kit to complete a true high flow 3" intake tract. Deletes the restrictive factory airbox and clears the area inside the driver side fender and headlight area to run FMIC pipes in and out. Specify color: black, red, or blue silicone connectors
|
|
| AEM Air Intake for 07+ Mazdaspeed3 |
Top |
|
Brand: AEM
Desc: 07+ Mazdaspeed 3
Type: Intake
Status: Ready to Ship
Price: $285.00
Buy Now
|
Mazdaspeed3 Intake:
Gone are the days of an intake serving aesthetic purposes only. There is no question that cold air intakes make serious power on the Mazdaspeed3, and who better to turn to than the air induction experts at AEM? The AEM cold air intake for the 07-08 Mazdaspeed3 incorporates many features that other manufacturers omit to save time and production costs. The AEM cold air intake uses stock diameter size mandrel bent aluminum piping and even includes an air-flow straightener, a critical part to the MS3 induction system that ensures proper fuel trims and minimized intake turbulence. The AEM cold air intake system for the Mazdaspeed3 includes AEM's famous washable oil-free conical dry-flow air filter, instructions and all the necessary installation hardware. The AEM cold air intake for the Mazdaspeed3 is available in powder coated silver or polished aluminum finish.
|
|
Turbo Upgrade | Intercooler Kits | Package Kits | Exhausts & Downpipes | Engine Upgrades | Brake Upgrades
| Stop Tech Front Big Brake Kits for 07+ Mazdaspeed3 |
Top |
|
Brand: Stop Tech
Desc: 06+ Mazdaspeed 6
Type: Brakes
Status: Ready to ship
Price: See Below
Buy Now
|
Stop Tech has released a front big brake kit for the 07-09 Mazdaspeed3. These kits use a ST-40 four piston caliper, 332x32mm rotors, stainless steel brake lines, and Stop Tech brake pads. They are available in different caliper colors and with slotted or drilled rotors. Stop Tech also added to their Mazdaspeed3 offerings by releasing PosiQuiet brake pads, Stop Tech brake pads, and stainless steel brake lines to go with the rotors they already had on the market.
|
For Engines: 2.2L
Boost: N/A
HP: N/A
Direct Bolt-On: Yes
Questions & Information:
- Frequently Asked Questions (see here first)
- Contact Us NOW (any other questions)
|
|
| Part# |
Zinc Coating |
Caliper Color |
Price |
| 83.622.4600.51 |
No |
Black |
$2160.00 |
| 83.622.4600.53 |
Yes |
Black |
$2260.00 |
| 83.622.4600.61 |
No |
Silver |
$2160.00 |
| 83.622.4600.63 |
Yes |
Silver |
$2260.00 |
| 83.622.4600.71 |
No |
Red |
$2160.00 |
| 83.622.4600.73 |
Yes |
Red |
$2260.00 |
|
|
Universal Kits
