2007-2021 Tundra 5.7L Stage 1 Turbo Kit - 500HP
*Engine pictures are for illustration purposes only, you do NOT need to remove the motor to install the turbo kit!
Price Match Guarantee
Found it for less but value our service?
Have a Question About This Product
Found it for less but value our service?
Details
2007-2021 Toyota Tundra 5.7L 3UR-FE Single Turbo Kit, Stage 1, 500HP by TurboKits.com
439WHP / 500WTQ 4.5 PSI DYNO Video: https://www.youtube.com/shorts/7Y73tON0EAM
Turbo Kit Development Forum Thread: https://www.tundras.com/threads/turbo-charging-a-tundra.115951/
Wake the inner BEAST of your 5.7L Toyota Tundra with power beyond your WILDEST expectations. Never before has there been a package so potent, so complete, so easy to install that offers power beyond the 500 ft. lbs., 439 HP level TO THE WHEELS at just 4.5 PSI of boost! With ONLY the turbo kit and a tune. Still running stock fuel injectors and stock fuel pump, stock motor, stock transmission. Add injectors and pump for more power and PSI potential. Yes, we have hinted this kit would become available and FINALLY, after years of painstakingly testing this system on all the incredible 5.7L Toyota Tundra platforms, the Stage 1 Turbo Kit from the best turbo kit builders on the planet, is ready to ship! The HP and TQ numbers are amazing, we know the 5.7L Toyota motor CRAVES boost, but through all our testing in the scorching heat of summer and the icy cold mornings of winter have we paid extremely close attention to? The tune! Smooth acceleration when you want it, tire shredding power when you need it, this turbo kit delivers! The expertly designed Stage 1 turbo kit will open the door to more HP and TQ, greater fuel efficiency, faster acceleration, and improved towing capability, yet best of all, you can easily upgrade to the stage 1.5 and 2.0 (coming soon) if additional power and performance needs arise! This bolt on turbo package includes everything you’ll need to upgrade your truck- All the piping, lines, fittings, hardware, clamps and couplers, and FREE friendly tech support is included! You’ve wanted a more powerful Tundra for a long time and TurboKits.com just made it easy!
Tuning your Turbo Tundra:
The base ECU calibration is included with the purchase of your turbo kit. This is purely the mapping off either our 2007-2013, 2014-2018 or 2019+ test trucks. Copying it over to your mapping and making it all work and run properly, is the installers responsibility. If you want a turn key solution and tuning support. Please look to our Turn Key OTT Turbo Kit. In regards to the actual HP tuners software and cable. You have two options:
- Purchase the HP Tuners System to use for creating / uploading the base map and use for any additional tuning you may want to do. The system and cable is yours to keep. *HIGHLY SUGGESTED
- Work with a friend or local tuner whom already has the cable. We have no problem sending you a map to work from when using your HP tuners.
Tundra Turbo System Includes:
- Precision 7675 T4 Turbo
- Precision 46mm Wastegate
- AEM V3 Progressive Water Meth Kit
- No Tap Bed Mount Water Meth Install Kit
- Billet Blow Off Valve (BOV)
- Custom Stage 1 Straight Shot Coupler
- Custom High FLOW Mass Air Sensor (MAF)
- HP Tuners Stage 1 Calibration
- SS Mandrel Bent Cross Over Pipe
- SS Mandrel Bent Turbo Pipe
- SS Mandrel Bent 3" Downpipe w- Extra O2 Bung
- SS Y Pipe for Factory Exhaust Connection
- Wastegate "Screamer" Shootout Pipe
- DIY Wastegate Recirculation Kit
- Vibrant SS V-Band Clamps
- Misc Couplers, Clamps, Fittings, Lines, Gaskets
- Step by Step COLOR PDF Installation Instructions
Optional Pictured Turbo Kit Items:
- Innovate SCG1 Wideband, Boost Gauge and Boost Controller
- HP Tuners MPVI ProLink w- 4 Credits
- NGK 1 Step Colder Spark Plugs
- Turbo Blanket, Wrap and Heat Protection Kit
Notes:
*For OFF ROAD USE ONLY, CANNOT SHIP TO CALIFORNIA
**Professional Installation and Tuning Suggested
***Suspension lifts on 4WD trucks above and beyond the standard 2-3” leveling kits will require custom modification to the cross over pipe by the installer.
****Engine pictures are for illustration purposes only, you do NOT need to remove the motor to install the turbo kit!
*****Stage 1, Stock Injectors are good to about 3-4 PSI with Meth. Anything over 4-5 PSI on th stage 1, whether you are running injectors or not and we would suggest jumping to the Stage 2 for better longevity and control.
******Due to the proximity of the MAF to the turbo and Throttle Body. Truck in colder climates, where you see 20-30* Cold starts and colder, can see cold start misfires and lean conditions for the initial start. We are working on a patch for this in the basemapping.
More Information
| Part Brand | TurboKits.com |
|---|---|
| Type of Part | Turbo Kits |
| Engine Fitment | 5.7L |
| Length | 42 |
| Width | 20 |
| Height | 20 |
| Weight | 110.000000 |
Video
Reviews
Top customer reviews
Review: I had been tracking Turbokits.com on a Tundra forum throughout the development of this kit. Stars aligned (time availability, location, and of course, pricing) for me to become their first DIY customer for the kit.
Requirements were simple and all focused on towing performance and reliability: Don't destroy my 50k mile, 5 yr old Tundra. Don't impact my camping schedule. Don't leave me or my family stranded because of the kit.
I did the entire install myself, zero help, in my 24' x 24' two car garage with my own tools. No lift. The amount of modification to the vehicle was all superficial and limited to 3 holes (widening 2 on the inner fender, creating 1 on the oil pan). That's it. Everything else is bolt on (or stick/wrap on for heat protection).
Jesse has been absolutely amazing throughout the entire process, and aside from the truck making all the right sounds, this truck tows my 8k lbs travel trailer with ease! I have gained an entire gear while towing and easily reduced torque converter unlocks or downshifts by over 50%. I'm blown away (pun intended) by how much just 4'ish PSI has completely changed this vehicle. This is my first forced induction experience, and it is everything I could ask for. Strongly encourage all of the extras available for the kit. Combined, they deliver all the flexibility and redundancy/safety one could ask for - example: I'm using the electronic boost controller to hold 4'ish PSI, but I can rapidly switch cut over to the 1.5PSI physical spring installed in the wastegate so I can complete a towing trip if I ever run out of water methanol, all from the drivers seat and while in motion. I never realized I could have that much control.
I believe Jesse has included some photos and videos of my truck on the site. It is the 2019 Silver Tundra. He's the man and can talk through all of the details of my project. The only way he could have been more involved is if he was in my garage handing me tools.
Great job to Jesse and Turbokits.com! I couldn't be happier.
Fitment
2007-2021 Toyota Tundra 5.7L 3UR-FE Single Turbo Kit, Stage 1, 500HP by TurboKits.com
439WHP / 500WTQ 4.5 PSI DYNO Video: https://www.youtube.com/shorts/7Y73tON0EAM
Turbo Kit Development Forum Thread: https://www.tundras.com/threads/turbo-charging-a-tundra.115951/
Wake the inner BEAST of your 5.7L Toyota Tundra with power beyond your WILDEST expectations. Never before has there been a package so potent, so complete, so easy to install that offers power beyond the 500 ft. lbs., 439 HP level TO THE WHEELS at just 4.5 PSI of boost! With ONLY the turbo kit and a tune. Still running stock fuel injectors and stock fuel pump, stock motor, stock transmission. Add injectors and pump for more power and PSI potential. Yes, we have hinted this kit would become available and FINALLY, after years of painstakingly testing this system on all the incredible 5.7L Toyota Tundra platforms, the Stage 1 Turbo Kit from the best turbo kit builders on the planet, is ready to ship! The HP and TQ numbers are amazing, we know the 5.7L Toyota motor CRAVES boost, but through all our testing in the scorching heat of summer and the icy cold mornings of winter have we paid extremely close attention to? The tune! Smooth acceleration when you want it, tire shredding power when you need it, this turbo kit delivers! The expertly designed Stage 1 turbo kit will open the door to more HP and TQ, greater fuel efficiency, faster acceleration, and improved towing capability, yet best of all, you can easily upgrade to the stage 1.5 and 2.0 (coming soon) if additional power and performance needs arise! This bolt on turbo package includes everything you’ll need to upgrade your truck- All the piping, lines, fittings, hardware, clamps and couplers, and FREE friendly tech support is included! You’ve wanted a more powerful Tundra for a long time and TurboKits.com just made it easy!
Tuning your Turbo Tundra:
The base ECU calibration is included with the purchase of your turbo kit. This is purely the mapping off either our 2007-2013, 2014-2018 or 2019+ test trucks. Copying it over to your mapping and making it all work and run properly, is the installers responsibility. If you want a turn key solution and tuning support. Please look to our Turn Key OTT Turbo Kit. In regards to the actual HP tuners software and cable. You have two options:
- Purchase the HP Tuners System to use for creating / uploading the base map and use for any additional tuning you may want to do. The system and cable is yours to keep. *HIGHLY SUGGESTED
- Work with a friend or local tuner whom already has the cable. We have no problem sending you a map to work from when using your HP tuners.
Tundra Turbo System Includes:
- Precision 7675 T4 Turbo
- Precision 46mm Wastegate
- AEM V3 Progressive Water Meth Kit
- No Tap Bed Mount Water Meth Install Kit
- Billet Blow Off Valve (BOV)
- Custom Stage 1 Straight Shot Coupler
- Custom High FLOW Mass Air Sensor (MAF)
- HP Tuners Stage 1 Calibration
- SS Mandrel Bent Cross Over Pipe
- SS Mandrel Bent Turbo Pipe
- SS Mandrel Bent 3" Downpipe w- Extra O2 Bung
- SS Y Pipe for Factory Exhaust Connection
- Wastegate "Screamer" Shootout Pipe
- DIY Wastegate Recirculation Kit
- Vibrant SS V-Band Clamps
- Misc Couplers, Clamps, Fittings, Lines, Gaskets
- Step by Step COLOR PDF Installation Instructions
Optional Pictured Turbo Kit Items:
- Innovate SCG1 Wideband, Boost Gauge and Boost Controller
- HP Tuners MPVI ProLink w- 4 Credits
- NGK 1 Step Colder Spark Plugs
- Turbo Blanket, Wrap and Heat Protection Kit
Notes:
*For OFF ROAD USE ONLY, CANNOT SHIP TO CALIFORNIA
**Professional Installation and Tuning Suggested
***Suspension lifts on 4WD trucks above and beyond the standard 2-3” leveling kits will require custom modification to the cross over pipe by the installer.
****Engine pictures are for illustration purposes only, you do NOT need to remove the motor to install the turbo kit!
*****Stage 1, Stock Injectors are good to about 3-4 PSI with Meth. Anything over 4-5 PSI on th stage 1, whether you are running injectors or not and we would suggest jumping to the Stage 2 for better longevity and control.
******Due to the proximity of the MAF to the turbo and Throttle Body. Truck in colder climates, where you see 20-30* Cold starts and colder, can see cold start misfires and lean conditions for the initial start. We are working on a patch for this in the basemapping.
