2015+ F80 M3 | F82/F83 M4 Garrett Water to Air Intercooler Upgrade - Silver
TAGS: 2015, 2016, 2017, 2018, 2019+, F80 BMW M3 & F82/F83 BMW M4, Garrett Water to Air Intercooler Upgrade, Silver, 888883-6001
Found it for less but value our service?
Details
2015+ F80 M3 | F82/F83 M4 Garrett Water to Air Intercooler Upgrade - Silver - 888883-6001
Garrett Powermax™ direct fit performance air-to-liquid intercooler for the 2015+ BMW M3 and M4 boasts a 47% larger core with dual pass coolant flow to help reduce intake manifold temperatures by an average of 10 °F. Optimized end tanks improve air flow through the core.
An average increase of 12.4 horsepower and 4.9 lb-ft of torque were measured during back to back dyno pulls. This direct fit performance intercooler installs in 1.5 hours and reuses the stock bolts, hoses, and clamps.
Garrett Intercooler Upgrade Features:
• Supports up to 980hp
• 47% larger core than stock
• Installs in stock location
• Cast aluminum end tanks
• Air-to-liquid design
• Bar-and-plate construction
Performance Dyno Testing:
Garrett performed a vehicle dyno test to gather data comparing the OE to Garrett intercooler. Multiple back to back dyno pulls measure intercooler effectiveness by comparing horsepower output, inlet and outlet temps, OBD II data.
Engine gains 12.4 horsepower and 4.9 lb-ft of torque on average after heat soak (10th pull)
Engine gains 18.7 horsepower and 6.4 lb-ft of torque at the 15th pull
OBD II Data:
• After heat soak, charge air flow rate and pressure increase
• ~2 lb/min higher charge air flow rate after 10th pull
• ~1.5 psi higher charge air pressure after the 10th run
Apllicable Garrett Part Number: 888883-6001, 888883-6002
More Information
| Part Number | 888883-6001 |
|---|---|
| Brand | Garrett |
| Type of Part | Intercoolers |
| Engine Fitment | S55 |
| Length | 24 |
| Width | 18 |
| Height | 10 |
| Weight | 20.000000 |
Reviews
Fitment
2015+ F80 M3 | F82/F83 M4 Garrett Water to Air Intercooler Upgrade - Silver - 888883-6001
Garrett Powermax™ direct fit performance air-to-liquid intercooler for the 2015+ BMW M3 and M4 boasts a 47% larger core with dual pass coolant flow to help reduce intake manifold temperatures by an average of 10 °F. Optimized end tanks improve air flow through the core.
An average increase of 12.4 horsepower and 4.9 lb-ft of torque were measured during back to back dyno pulls. This direct fit performance intercooler installs in 1.5 hours and reuses the stock bolts, hoses, and clamps.
Garrett Intercooler Upgrade Features:
• Supports up to 980hp
• 47% larger core than stock
• Installs in stock location
• Cast aluminum end tanks
• Air-to-liquid design
• Bar-and-plate construction
Performance Dyno Testing:
Garrett performed a vehicle dyno test to gather data comparing the OE to Garrett intercooler. Multiple back to back dyno pulls measure intercooler effectiveness by comparing horsepower output, inlet and outlet temps, OBD II data.
Engine gains 12.4 horsepower and 4.9 lb-ft of torque on average after heat soak (10th pull)
Engine gains 18.7 horsepower and 6.4 lb-ft of torque at the 15th pull
OBD II Data:
• After heat soak, charge air flow rate and pressure increase
• ~2 lb/min higher charge air flow rate after 10th pull
• ~1.5 psi higher charge air pressure after the 10th run
Apllicable Garrett Part Number: 888883-6001, 888883-6002
