2018+ Kia Stinger 3.3TT 76mm King Size Throttle Body | Velossa Tech
Price Match Guarantee
Found it for less but value our service?
Have a Question About This Product
Found it for less but value our service?
Details
2018, 2019, 2020, 2021, 2022, 2023, Kia Stinger, Genesis G70, 76mm TB, King Size Throttle Body, Multi-Plate Adapter Kit, Velossa Tech
Upgrade your 2017+ Kia Stinger 3.3T and Genesis G70 3.3T with the Velossa Tech 76mm KING SIZE Throttle Body and Multi-Plate Adapter Kit!
Over 6 months of engineering went into this product; no corners cut, no stones left unturned. This 76mm throttle body and port-matched adapter plate kit is a MUST-HAVE for your 3.3T.
Features
- 6061 CNC Machined Aircraft Aluminum Port-Matched Adapter Plates
- 3x 1/8" NPT ports come plugged, ready for nitrous or methanol injection
- Grooved Adapters for Silicone O-rings
- All hardware included
- Custom-molded silicone couplers for your charge piping of choice
- Custom-molded silicone caps for coolant lines (clamps included)
- Stainless T-bolt clamps for high boost applications
- Loctite included
- Full video installation guide available
- Lead time is ~5-7 business days. Thank you for your patience!
1. Q. The kit has no hook up for OEM coolant lines, will that be a problem?
A. Engine coolant runs around 220F-240F, this heat is power robbing, we purposefully remove these lines so heat does not get dumped into your charge air through a scalding hot throttle body. We supply custom silicone 10mm caps to efficiently delete the coolant lines that would otherwise be putting heat INTO your charge air. If you live in cold climates, don't fret, just let your engine warm up for another minute or two during cold start, this is commonly done on modded vehicles to keep charge air as dense as possible.
2. Q. What power gains will I see?
A. We worked closely with professional tuners (Florez Tuning of Arizona) to ensure our data was repeatable and true. We tested our product on a STOCK tune vehicle for true baseline results. Our full kit is compatible with virtually all tunes and mods, and you'll see more power with a modded vehicle.
3. Q. Will this kit work with my charge pipes?
A. We offer multiple configurations for charge pipe size and geometry, chances are we can accommodate you. If not sure, just shoot us an email
The stock throttle body is 68mm — even worse, the throttle blade and shaft act as a flow path restriction (especially at WOT where airspeed is highest, and easily disrupted).
Bumping up the diameter of the throttle body to 76mm and port-matching it netted 10 WHP gains at the wheels on a STOCK TUNE vehicle in the Arizona HEAT! If you are modded, you'll likely pick up more, and the throttle response is NUTS! Trust us!
This kit comes with everything you need, and the silicone couplers are custom molded for almost any configuration of boost piping you may have. OEM cold side piping and most aftermarket intercooler/charge piping options are compatible!
Port-matching is absolutely necessary to reduce pressure drop due to step changes in the flow path.
Pick up dyno-proven horsepower with a 76mm throttle body and port-matched multi-plate adapter kit.
This kit includes all hardware for installation and in almost all cases will not require a re-tune! A true plug-and-play power adder designed specifically for the 3.3T.
Test Results
- Performance logs provide validated measurable gains on a STOCK TUNE, under consistent conditions, within one hour, before/after. Tested in collaboration with Florez Tuning of Arizona.
More Information
| Part Number | TB-0001 |
|---|---|
| Part Brand | Velossa Tech |
| Type of Part | Engine |
| Engine Fitment | 3.3TT |
| Length | 12 |
| Width | 12 |
| Height | 10 |
| Weight | 15.000000 |
Reviews
Fitment
2018, 2019, 2020, 2021, 2022, 2023, Kia Stinger, Genesis G70, 76mm TB, King Size Throttle Body, Multi-Plate Adapter Kit, Velossa Tech
Upgrade your 2017+ Kia Stinger 3.3T and Genesis G70 3.3T with the Velossa Tech 76mm KING SIZE Throttle Body and Multi-Plate Adapter Kit!
Over 6 months of engineering went into this product; no corners cut, no stones left unturned. This 76mm throttle body and port-matched adapter plate kit is a MUST-HAVE for your 3.3T.
Features
- 6061 CNC Machined Aircraft Aluminum Port-Matched Adapter Plates
- 3x 1/8" NPT ports come plugged, ready for nitrous or methanol injection
- Grooved Adapters for Silicone O-rings
- All hardware included
- Custom-molded silicone couplers for your charge piping of choice
- Custom-molded silicone caps for coolant lines (clamps included)
- Stainless T-bolt clamps for high boost applications
- Loctite included
- Full video installation guide available
- Lead time is ~5-7 business days. Thank you for your patience!
1. Q. The kit has no hook up for OEM coolant lines, will that be a problem?
A. Engine coolant runs around 220F-240F, this heat is power robbing, we purposefully remove these lines so heat does not get dumped into your charge air through a scalding hot throttle body. We supply custom silicone 10mm caps to efficiently delete the coolant lines that would otherwise be putting heat INTO your charge air. If you live in cold climates, don't fret, just let your engine warm up for another minute or two during cold start, this is commonly done on modded vehicles to keep charge air as dense as possible.
2. Q. What power gains will I see?
A. We worked closely with professional tuners (Florez Tuning of Arizona) to ensure our data was repeatable and true. We tested our product on a STOCK tune vehicle for true baseline results. Our full kit is compatible with virtually all tunes and mods, and you'll see more power with a modded vehicle.
3. Q. Will this kit work with my charge pipes?
A. We offer multiple configurations for charge pipe size and geometry, chances are we can accommodate you. If not sure, just shoot us an email
The stock throttle body is 68mm — even worse, the throttle blade and shaft act as a flow path restriction (especially at WOT where airspeed is highest, and easily disrupted).
Bumping up the diameter of the throttle body to 76mm and port-matching it netted 10 WHP gains at the wheels on a STOCK TUNE vehicle in the Arizona HEAT! If you are modded, you'll likely pick up more, and the throttle response is NUTS! Trust us!
This kit comes with everything you need, and the silicone couplers are custom molded for almost any configuration of boost piping you may have. OEM cold side piping and most aftermarket intercooler/charge piping options are compatible!
Port-matching is absolutely necessary to reduce pressure drop due to step changes in the flow path.
Pick up dyno-proven horsepower with a 76mm throttle body and port-matched multi-plate adapter kit.
This kit includes all hardware for installation and in almost all cases will not require a re-tune! A true plug-and-play power adder designed specifically for the 3.3T.
Test Results
- Performance logs provide validated measurable gains on a STOCK TUNE, under consistent conditions, within one hour, before/after. Tested in collaboration with Florez Tuning of Arizona.
