My Cart

Forge Type RS Blow Off Valve (BOV)

SKU
FMDVRSA
Views: 0
$260.00
Bread Checkout
 
This valve incorporates a unique conical, progressive rate spring that can allow for the retention of boost pressure from 7 to 22 PSI depending on the individual user's application and level of adjustment. If you are intending on running over 22psi then you will need the uprated spring FMRSTUN.
 
This unique spring design will also allow for unrestricted piston travel and flow volume regardless of the amount of pre-load adjustment added to the spring. Other manufacturers valves using cylindrical springs with adjustable pre-load often experience restricted piston travel and flow volume within the normal range of valve adjustment.
Please note: When configured as a Dual- Piston Atmospheric Valve

"All Forge Motorsport Dual- Piston Atmospheric Valves have been designed and built with the intent of venting 100% of the residual charge air remaining in your forced induction system to the atmosphere at throttle lift.
 
While we have incorporated many elements into the design of the Dual-Piston valves to aid in their compatibility with mass air-flow sensor equipped vehicles, we cannot always guarantee that each individual’s application will be compatible with a valve that vents the charge air into the atmosphere.
 
Forge Motorsport nor any of it’s Authorized Distributors can assume any responsibility for any adverse effects resulting from the installation of this valve onto a vehicle whose engine-management- system, whether factory or aftermarket, is not capable of compensating for the loss of metered air through a vent-to-atmosphere valve such as this. "

Please specify valve finish and hose connector diameter when ordering.

For CA Proposition 65 Warning: Click Here

More Information
Part NumberFMDVRSA
BrandForge Motorsport
Type of PartBlow Off Valves
Height6.0
Width6.0
Weight5.000000
Length10.0
Write Your Own Review
You're reviewing:Forge Type RS Blow Off Valve (BOV)
Your Rating