Precision Turbo Rebuild Kit

SKU:
PTE-REBLD-KIT
Views: 4

*In Stock - Fast Shipping!*
To your door in 2-3 days or sooner!

Qty
 
Please complete product configuration
Details

#1 Journal Bearings
#2 Retaining Ring for Journal Bearings
#3 Piston Ring for Turbine End
#4 High Performance 360* Thrust Bearing
#5 Thrust Collar
#6 Piston Ring for Compressor End
#7 Seal Ring for Bearing Housing
#8 Thrust Spring
#9 Locknut for Shaft
#10 O-Ring/Gasket for Compressor Housing
#11 Bolts for Compressor End
#12 Lockplate for Compressor End
#13 Clamps for Compressor End T04B & T04E Included
#14 Bolts for Bearing Housing
#16 Lock Plates for Turbine End
#17 Bolts for Turbine End
#18 Clamps for Turbine End

We now have Precision Rebuild Kits available for the standard shaft Precision Journal Bearing Turbochargers. Most Precision Journal Bearing Turbos 55 up to 62s and some 67s. You will need to measure the turbine shaft diameter to see this kits will fit your 67mm. The measurements are .25" for the standard shaft. This measurement is taken on the turbine shaft where the compressor wheel slides onto it. There is a step for the wheel, measure the turbine shaft diameter on the step, if you are .25" and journal Bearing. This rebuild kti will work for you!

The Precision rebuild kit shaft nut TQ spec:

  1. We highly suggest 2 drops of red Loctite
  2. 28 inch pounds (not foot pounds)
  3. If it is standard right hand thread an additional 1/4 of a turn; If it is reverse left hand thread then an additional 1/8 of a turn

Also, always, torque it this way, then loosen it up and do the procedure one more time, just to make sure you got all of the slack out the first time and everything seats.

Don't confuse our rebuild kits with the "cheap imitation" products found on auction sites or less than reputable online stores. Buy your USA, Canada or UK made rebuild kit from TurboKits.com and rest assured knowing you are receiving quality parts!

Don't want to rebuild the turbo yourself, check out the TurboKits.com rebuild service, thanks.

Fits most Precision small / mid frame turbos w- Billet Compressor Wheels
JOURNAL BEARING ONLY

If you know the turbo rebuild kit you require, feel free to place the order online now. If not, we cannot research the proper turbo rebuild kit without a turbo part number. Please locate the part number(s) on your turbo and submit them to our "Contact Us" form. We will respond with a price and availability. Thank you.

More Information
Part Number PTE-REBLD-KIT
Brand TurboKits.com
Type of Part Turbo Rebuild Kits
Length 2.0
Width 10.0
Height 8.0
Weight 1.000000
Reviews
Write Your Own Review
You're reviewing: Precision Turbo Rebuild Kit
Your Rating:
loader
Loading...

check-circle You submitted your review for moderation.

Fitment
Details

#1 Journal Bearings
#2 Retaining Ring for Journal Bearings
#3 Piston Ring for Turbine End
#4 High Performance 360* Thrust Bearing
#5 Thrust Collar
#6 Piston Ring for Compressor End
#7 Seal Ring for Bearing Housing
#8 Thrust Spring
#9 Locknut for Shaft
#10 O-Ring/Gasket for Compressor Housing
#11 Bolts for Compressor End
#12 Lockplate for Compressor End
#13 Clamps for Compressor End T04B & T04E Included
#14 Bolts for Bearing Housing
#16 Lock Plates for Turbine End
#17 Bolts for Turbine End
#18 Clamps for Turbine End

We now have Precision Rebuild Kits available for the standard shaft Precision Journal Bearing Turbochargers. Most Precision Journal Bearing Turbos 55 up to 62s and some 67s. You will need to measure the turbine shaft diameter to see this kits will fit your 67mm. The measurements are .25" for the standard shaft. This measurement is taken on the turbine shaft where the compressor wheel slides onto it. There is a step for the wheel, measure the turbine shaft diameter on the step, if you are .25" and journal Bearing. This rebuild kti will work for you!

The Precision rebuild kit shaft nut TQ spec:

  1. We highly suggest 2 drops of red Loctite
  2. 28 inch pounds (not foot pounds)
  3. If it is standard right hand thread an additional 1/4 of a turn; If it is reverse left hand thread then an additional 1/8 of a turn

Also, always, torque it this way, then loosen it up and do the procedure one more time, just to make sure you got all of the slack out the first time and everything seats.

Don't confuse our rebuild kits with the "cheap imitation" products found on auction sites or less than reputable online stores. Buy your USA, Canada or UK made rebuild kit from TurboKits.com and rest assured knowing you are receiving quality parts!

Don't want to rebuild the turbo yourself, check out the TurboKits.com rebuild service, thanks.

Fits most Precision small / mid frame turbos w- Billet Compressor Wheels
JOURNAL BEARING ONLY

If you know the turbo rebuild kit you require, feel free to place the order online now. If not, we cannot research the proper turbo rebuild kit without a turbo part number. Please locate the part number(s) on your turbo and submit them to our "Contact Us" form. We will respond with a price and availability. Thank you.

More Information Reviews Fitment
P65 warnings
This websites use cookies. By continuing to browse the site you are agreeing to our use of cookies.
Image